05. 09, 2020

The reason for the sudden breakdown of feed pellet mill

Pellet mill is a key equipment in the process of feed production. Its working efficiency directly affects the output and quality of the final product. However, during the daily operation of the machine, it will stop suddenly, which will seriously affect the production efficiency. So why does the granulator suddenly stop? FDSP Will answer your quest

04. 24, 2020

Cause analysis of quick failure for feed pellet mill ring dies

When we buy feed pellet mills, usually buy a few more additional ring dies. Because the pellet mill dies bear great pressure when working, which are more likely to appear problems compared with the other parts. Once the die has a problem, its material output can not meet the standard, must change the die and repelleting. Die replacement is disguise

04. 18, 2020

Analysis for Factors affecting the output of feed processing equipment

There are many factors affecting the output of feed processing equipment. First, we will analyze the key factors affecting the output of pellet mill during the pelletizing process:

04. 10, 2020

Raw material cleaning, the selection of feed cleaning equipment is the key

In the process of feed processing, raw material cleaning is very important. Due to the cause of imperfect cleaning process such as pipe blockage, material road not free, conveying machinery idling, hammer mill sieving and pelletizing machine die &roller damage or breakdown phenomenon occurs from time to time.To avoid the above phenomenon, we should

03. 28, 2020

To Improve the Feed Quantity Efficiently by Upgrading the Processing Technology

During the procedure of feed production, there are three main points that influence the products; quality: quality of raw materials, formula of feed, and the processing technology. While the quality of raw materials as well as formula has been well controlled, many feed enterprises are seeking for improvement of processing technology to provide the

03. 20, 2020

Cause analysis and troubleshooting of common faults of pellet mill

03. 11, 2020

Moisture control of Suckling pig feed pellet during production

The lower the pellet water content, the more serious the mechanical wear and the lower the production efficiency. If Pellet moisture is in 11%~13%, production efficiency is fast, and mechanical wear is light.