Feeding machine TWLL Series Screw Feeder

Applicable for horizontal conveying of granular or powdery materials such as grain, oil, feed, or inclined conveying close to horizontal (inclination angle ≤20°), mainly used for ingredients in feed plants.

■ The cylinder structure is U-shaped, and the top flat cover is convenient for dismantling and maintenance;

■The feeding section is provided with an anti-powder tumbling device to effectively prevent the machine from being blocked;

■ Double-sealed structure at the shaft end to prevent leakage;

■  Manual gate can be added at the charging end for later maintenance and repair;

■  Cleaning operation door is equipped at discharged end;

■ With cold drawn blades, the pitch is more uniform and the blade is more wear-resistant;

■  Suitable for horizontal or inclined conveying;

■ Small volume, high rotating speed, uniform feeding, good accuracy, low residue;

■Blades are arranged in equal diameter and variable distance to ensure the overall discharge of materials in the warehouse;

TWLL Series Screw Feeder

ModelParameter   TWLL   16TWLL   20TWLL   25TWLL   32
Dia. Of screw (mm)160200250320
Capacity (m³/h)8~1018-2040-4588-95
PowerCalculated based on length and capacityCalculated based on length and capacityCalculated based on length and capacityCalculated based on length and capacity

Shell: -3/Q235;

Blade: -4/Q235Cold drawing;                         

Section of cylinder: U-shaped;                           

Gear reducer: Zhejiang TUNG LEE or Brand customized by FDSP



サービスセンター: +86-519-6826 6288 /+86-17705145508

工事センター: +86-519-6826 6588 /+86-15206145688

南側工場: 江蘇省溧陽市江蘇中関村科学技術産業園晨陽路6号

北側工場: 江蘇省溧陽市江蘇中関村科学技術産業園泓盛路558号