Maintenance of feed machinery without oil outlet

11. 06, 2019

Feed machine has two main power sources. First is electric power. Second is oil. The synergy of the two power sources is the basis of ensuring the stable operation of feed machinery. Therefore, once the machinery is not outlet of oil, it will occur fault, and needs timely maintenance. FDSP suggests you to focus on the following aspects of maintenance:

1. Check whether there is any material residue in the feed machine, especially in the clearance between its spindle and rotor.

2. Remove the filter mesh of the oil filter in the machine and clean it carefully to avoid impurities blocking the mesh and impeding the filtration effect.

3, Disassemble the grease block in the feed machinery. The main purpose is to clean the  impurities in the oil hole .

In addition to the above operations, the refueling part of the equipment should be checked. If the oil leakage is serious, the oil in the machinery will not be supplied normally, which will affect the normal operation of the equipment.

Jiangsu Liangyou Zhengda Co., Ltd. is a professional feed machinery engineering expert, who has rich experience in feed engineering construction, and has established friendly relations of cooperation with more than 30 countries in the world. If you have related technical questions, welcome to contact us. We will be dedicated to serve you. Email:fdsp@fdsp-group.com.


Maintenance of feed machinery without oil outlet


お問い合わせ

サービスセンター: +86-519-6826 6288 /+86-17705145508

工事センター: +86-519-6826 6588 /+86-15206145688

南側工場: 江蘇省溧陽市江蘇中関村科学技術産業園晨陽路6号

北側工場: 江蘇省溧陽市江蘇中関村科学技術産業園泓盛路558号

Copyright©江蘇省梁友正達(FDSP)版権所有。